Step by step instructions for gluing inner corners

After completing, the principal problem can be irregular walls as well as the resulting folds on the background. It’s also required to take into account that when the walls are twisted the joints of wallpaper canvases can invisibly.

After gluing the last one in the front of the inner corner of the fabric should measure the remaining space. It’s measured from the edge of the glued cloth to the adjoining wall, the resulting amount is inserted 10-15 millimeters. When the walls are very curved, the further figure may be more.

Cut a strip equal to the resultant figure, taking into consideration the allowance. The surfaces are treated with adhesive. Depending on the type of coating it can be only the wall or surfaces.

The strip has been glued independently using the cut side into the wallsocket. The wallpaper should go on the other plane.

If the glued wallpaper is wrinkled, you will need to make several small cuts perpendicular to the springs.

Level or slope on the adjacent wall is a vertical line. The distance in the corner is equivalent to the diameter of the preceding cut strip, not adding additions.

The surfaces are smeared with adhesive, and then the coating is glued into the wall using the flat side into the line. The cut goes on the adjoining wall.

Protruding corner ought to be pasted by analogy with the interior, but there are small gaps, which also need to be taken into consideration when working.

Measured the distance remaining from the glued background to the adjacent wall. Add 20-25 millimeters to the got figure.

A segment gidpola.ru is cut away, considering the additional 20-25 millimeters.

Before gluing, the surfaces have been treated with adhesive.

The edge must be glued into the wallpaper fixed on the wall, the own cut side”goes” to the adjoining plane. If needed, small cuts are made in the area of going to the other background, smoothed and pushed to the wall.

Draw a vertical strip onto the adjacent wall in a distance of just glued cut strip and 6-10 millimeters.

After applying the glue, the strip is then placed on the wall using its flat side to the marked line, going over the border of this glued strip.

The joints are smeared with adhesive and ironed with a roller. Following that, the upper layer is trimmed along the ruler and the two layers are combined together.